|
|
MÔ TẢ SẢN PHẨM
EPM electrolytic starters can be used to start slipring motors from 500 kW to 20,000 kW. They will supply the power necessary to drive the motor by resistance variation. Designed for controlled starting and speed control of large slipring motors in demanding applications, the EPM liquir rotor starters ensure a smooth progressive acceleration of installations such as:
- Ventilation
- Crushing
- Milling
- Conveyors
- Pumps...
They are widely used in various industries such as mines, quarries, cement plants, water treatment and associated industries. They are also adapted to specific applications such as car fragmentisers, plastic mixers and sugar cane knives.
Several models and options are available according to the starting power required, the inertia of the driven machine and the application. Feel free to contact us and explain us about your requirements (Use the section Necessary information to quote a starter), our staff will quote the suitable starter and the eventual necessary options.
You will find below the description of an EPM starter and its operating principle.
Necessary information to quote a starter
Driven machine:
- Type (Crusher, conveyor…)
- Rotor data: Motor power, rotor voltage, rotor current
- Motor speed in tr / min
- Single or dual assembly
Ambient temperature: Minimum, maximum and average value
Starting time in s
Temps de démarrage : en secondes
Starting torge: Cn
Number of starts per hour
Number of consecutive starts
Country of destination
Electrical features:
| Reference | Maximum power | |||
| Tstarter / Tnominal = 0.7 | Tstarter / Tnominal = 1 | Tstarter / Tnominal = 1.4 | Tstarter / Tnominal = 2 | |
| EPM1/1 | 1,600 kW | 1,100 kW | 790 kW | 550 kW |
| EPM2/1 | 2,600 kW | 1,800 kW | 1,300 kW | 900 kW |
| EPM3/1 | 5,200 kW | 3,700 kW | 2,600 kW | 1,850 kW |
| EPM3/2 | 6,400 kW | 4,500 kW | 3,200 kW | 2,250 kW |
| EPM4/1 | 7,800 kW | 5,500 kW | 3,900 kW | 2,750 kW |
| EPM4/2 | 13,000 kW | 9,100 kW | 6,500 kW | 4,550 kW |
| EPM1/1 DUO | 2 x 1,600 kW | 2 x 1,100 kW | 2 x 790 kW | 2 x 550 kW |
| EPM2/1 DUO | 2 x 2,600 kW | 2 x 1,800 kW | 2 x 1,300 kW | 2 x 900 kW |
| EPM3/1 DUO | 2 x 5,200 kW | 2 x 3,700 kW | 2 x 2,600 kW | 2 x 1,850 kW |
| EPM3/2 DUO | 2 x 6,400 kW | 2 x 4,500 kW | 2 x 3,200 kW | 2 x 2,250 kW |
| EPM3/1 DUO | 2 x 7,800 kW | 2 x 5,500 kW | 2 x 3,900 kW | 2 x 2,750 kW |
| EPM4/2 DUO | 2 x 9,100 kW | 2 x 6,500 kW | 2 x 4550 kW | |
Maximum power of engine given for 1 start/hour and 3 consecutive starts from cold state.
Different models exist to suit the power of the starter(s) and the inertia of the driven machine.
The ranges of EPM starters given above are theoretical only, as ranges will depend on many further non negligible parameters such as starting conditions, starting time and cadenza, torque, type and load of the driven machine, ambient temperature…
Rotor voltage between rings: 3,500 V max
Standard starting times: 20, 30, 40, 60, 80, 130 s factory preset
Level of electrolyte monitored by magnetic floating system
Electrolyte temperature monitored by thermostats
Electrolyte cooling down by natural convection and agitator mixing
Low current density of electrodes: about 1 A/cm².
The ranges of EPM starters given above are theoretical only, as ranges will depend on many further non negligible parameters such as starting conditions, starting time and cadenza, torque, type and load of the driven machine, ambient temperature…
Rotor voltage between rings: 3,500 V max
Standard starting times: 20, 30, 40, 60, 80, 130 s factory preset
Level of electrolyte monitored by magnetic floating system
Electrolyte temperature monitored by thermostats
Electrolyte cooling down by natural convection and agitator mixing
Low current density of electrodes: about 1 A/cm².
Further features
Démarreur EPM DUO | When starting machines of large powers, or in order to reduce mechanical stress, it is sometimes preferable to use two starters totaling the rated power rather than a single one. An EPM DUO starter is then used, to ensure identical acceleration of both motors. The EPM DUO consists in two resistances whose ohmic values are equalized between the two tanks. The electrode drive assemblies are mechanically coupled, so as to ensure complete synchronization of the movement of the two electrode assemblies, which are driven by a common geared motor. The two resistances are finally shorted out by a single four or six pole shorting contactor, at the end of the run-up period. |
| EPM starter with heat exchanger | An EPM starter equipped with a heat exchanger is suitable for applications requiring: - high starting cadenza - speed variation or permanent sliding of the engine An exchanging system can be mounted on any EPM started, with the addition of a regulation servo-motor and a heat exchanger. Heat dissipation and capacity are increased significantly. This option requires an onsite supply of cool water. |
| Electrolyte | Composition: In powder or crystal form for mixing with drinking water and anti-evaporation oil Electrolyte temperature is controlled by thermostat 16 A/400 V. Electrolyte level: level is visible through transparency of tanks. |
| Antigel (option) | Protection down to -20°C It has to be inserted into the electrolyte before commissioning since it alters its resistivity. Il can be used throughout the year. |